Siemens MC35 manual Atspwd Change password for a lock, Atspwd=?, Atspwd =, Pin

AT Command Set

8.35 AT^SPWD Change password for a lock

Test command

AT^SPWD=?

Response

^SPWD: (list of supported (<fac>, <pwdlength>)s) OK

If error is related to ME functionality:

+CME ERROR: <err>

Parameter
<fac>	“P2” PIN2
	otherwise see write command without “FD”

<pwdlength>integer, max. length of password

Write command	Parameter
AT^SPWD =	<fac>	Phone security passwords
<fac>, <oldp-		“SC”	SIM card (PIN)
wd>,<newpwd>
		“P2”	PIN 2

“PS” Phone locked to SIM (device code)

Factory set locks

“PF” lock Phone to the very first SIM card “PN” Network Personalisation

“PU” Network subset Personalisation “PP” Service Provider Personalisation “PC” Corporate Personalisation

Supplementary Service: Call barring

“AO” BAOC ( Bar All Outgoing Calls)

“OI” BOIC ( Bar Outgoing International Calls)

“OX” BOIC-exHC (Bar Outgoing International Calls except to Home Country)

“AI” BAIC ( Bar All Incoming Calls)

“IR” BIC-Roam ( Bar Incoming Calls when Roaming outside the home country)

“AB” All Barring services

“AG” All outGoing barring services “AC” All inComing barring services

Note: All call barring types have usually the same ME <password> to lock and unlock. The default <password> is supplied from the network provider. TA sets a new password for the facility lock function.

<oldpwd> Password specified for the facility from the user interface or with command.

Can be ignored if no old password was allocated to the facility. Take into account that a password may have already been set by factory, or that the service is subject to a password issued by the provider.

MC35_ATC_01_V04.00 Page 208 of 238 02.04.2002