Setup 65
Set up call divert (example):
The most common condition for call divert is, for example:
Unansweredb
ISelect Unanswered. (Includes the conditions
Not reachable, No reply,
Busy, see below)
§Select§ Press.
Set Select.
JEnter the phone number to which the caller will be diverted (If not already entered)
Or
·Select this phone number
from the Phonebook or via §Mailbox§.
§OK§ Confirm. After a short pause, the setting is confirmed by the network.
No reply
A call is only diverted after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If Call waiting is activated (p. 64), you will hear the call waiting tone during a call.
Receiving fax | b |
Fax calls are diverted to a number with a fax connection.
Receiving data | b |
Data calls are diverted to a phone number with a PC connection.
Status check
You can check the current divert status for all conditions.
After a short pause, the current situation is transmitted by the network and displayed.
All calls | b | p |
All calls are diverted. | o | |
n | Symbol in the top line of | s |
| the display in standby |
|
| mode. |
|
Not reachable
Divert occurs if phone is switched off or is out of range.
Condition set. Not set.
Display if status is unknown (e.g. with a new SIM card).