Setup 69

§Menu§ ¢m ¢Connectivity

¢Select function.

Data services

For the MMS, WAP and HTTP applications at least one connection profile must be set up and activated.

The default for the phone depends on each service provider:

•The settings have already been implemented by the provider. You can start immediately.

•Access profiles have already been created by your provider. Then select and activate profile.

•The access profiles must be configured manually.

If necessary, check with your service provider for details. Current settings for each service provider may be found in the Internet under

www.my-siemens.com/customercarein the FAQ section.

ISelect profile.

§Options§ Open menu.

Change sett.

Press, then:

For CSD (Circuit Switched Data)

CSD settings

Select.

If it has not been preconfigured, enter the data or enter the required settings (your service provider will supply you with information on this):

§Edit§ Press.

Dial-up

Enter ISP number.

number

 

Call type:

Select ISDN/analogue.

Login name:

Enter login name.

Password:

Enter password (shown as

 

a series of asterisks).

DNS1 /

(optional).

DNS 2:

 

§Save§ Save settings.

For GPRS (General Packet Radio Service)

GPRS settings

Select.

You can activate GPRS for the profile and change the settings here. You can only start to use GPRS once you have activated GPRS on your phone (p. 68).

§Edit§ Press.