Siemens pa module p03-01 Matching SCE Trainer Packages for these curriculums, Continued education

Models: pa module p03-01

1 42
Download 42 pages 52.97 Kb
Page 2
Image 2

Industry Sector, IA&DT

Matching SCE Trainer Packages for these curriculums

SIMATIC PCS 7 Software block of 3 packages Order No. 6ES7650-0XX08-0YS5

SIMATIC PCS 7 Software block of 6 packages Order No. 6ES7650-0XX08-2YS5

SIMATIC PCS 7 Software Upgrade block of 3 packages Order No. 6ES7650-0XX08-0YE5 or 6ES7650-0XX17-0YE5

SIMATIC PCS 7 Hardware Set including RTX Box Order No. 6ES7654-0UE13-0XS0

Please note that these trainer packages may be replaced with subsequent packages.

An overview of the available SCE packages is provided under: siemens.com/sce/tp

Continued education

For regional Siemens SCE continued education, contact your regional SCE contact partner siemens.com/sce/contact

Additional information relating to SCE

siemens.com/sce

Note on Usage

The training curriculum for the integrated automation solution Totally Integrated Automation (TIA) was prepared for the program "Siemens Automation Cooperates with Education (SCE)“ specifically for training purposes at public educational and R&D facilities. Siemens AG is not liable regarding the contents.

This document may only be used for initial training on Siemens products/systems. This means: it may be copied entirely or partially and handed to trainees for use within the scope of their training. Passing on or copying this document and communicating its contents is permitted within public training and continued education facilities for training purposes.

Exceptions require written permission by Siemens AG. Contact person: Roland Scheuerer roland.scheuerer@siemens.com.

Violators are subject to damages. All rights including translation rights are reserved, particularly in the event a patent is granted or a utility model or design is registered.

Usage for industrial customer courses is explicitly not allowed. We do not agree to the commercial utilization of these documents.

We would like to thank the Technical University Dresden, particularly Prof. Dr. Leon Urbas and Annett Krause MS, as well as the Michael Dziallas Engineering Corporation and those who provided support in preparing this training curriculum.

SCE Training Curriculum

Page 2 of 42

To be used only at Educational and R&D Facilities

PA Module P03-01, Edition 09/2013

 

Unrestricted / © Siemens AG 2013. All Rights Reserved

P03-01_AdvancedLayout_R1309_en.doc

 

 

 

 

 

Page 2
Image 2
Siemens pa module p03-01 manual Matching SCE Trainer Packages for these curriculums, Continued education, Note on Usage