Industry Sector, IA&DT
19. Then, select ‘Axis‘. Here, set the attribute ‘Scale‘ to ‘No‘.
20.In ‘Limits‘, specify the known low and high limit, their monitoring and the color of the bars if the limit is exceeded. (→ Properties → Bar → Limits → Low/high limit: refer to
display/Monitoring: Yes → 
)
SCE Training Curriculum | Page 21 of 42 | To be used only at Educational and R&D Facilities |
PA Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
|
| |
|
|
|
