Industry Sector, IA&DT
17.Now, the display is positioned exactly over the reactor and some levels are moved to the back (Arrange → Within the level → One to back) for the stirrer, the heater and the labeling to be visible again; then open the Properties for additional adaptations. (→ Properties)
18.In the ‘Properties’ change to ‘Other‘ the 'TooltipText‘ in ‘A1T2L001‘. (→ Properties → Other → Tooltip Text → A1T2L001 (→ OK)
SCE Training Curriculum | Page 20 of 42 | To be used only at Educational and R&D Facilities |
PA Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
|
| |
|
|
|
