Siemens S50037 manual Module

SieMo S50037 Data Book PRELIMINARILY

SieMo S50037

-Module

KEY Features

￿Bluetooth V1.1 prequalified

￿Input sensitivity –85 dBm

￿Point-to-multipoint functionality

￿Firmware below HCI embedded, or stand alone operation

￿Class 2 Bluetooth device, 2 dBm

￿HCI optionally via high-speed UART, BCSP and USB

￿Interface data rate UART to 1.5 MBPS, USB high speed 1.1 (12 MBPS)

￿Frequency range 2.402 – 2.480 GHz

￿Temperature range 0-40° centigrade (qualified)

￿Mechanical outline 32.8 x 16.8 x 3 mm³ (34 x 18 x 3 mm³ for sample quantities)

￿Power supply 3.25V-6V, Max. 120 mA

￿GFSK modulation, frequency hopping, 79 channels spaced by 1 MHz

￿Internal Crystal oscillator

￿50 Ohm Antenna connector

￿SMD mountable

Description:

The SieMo S50037 is a Class2 Bluetooth Module which can be integrated into various electronic devices to give them Bluetooth functionality.

The connections to the environment consist of a single positive power supply, a 50 Ohm Antenna connector, UART, SPI, BCSP USB and PCM Interface, 6 PIO lines, control signals for an external Power Amplifier and one Pin which allows to switch between two different firmware versions.

SieMo is shipped as an HCI Module, which means that the lower Bluetooth stack up to HCI is included in the Firmware and it can be changed into a stand-alone Module with the complete BT- stack and some simple applications running on the module via a firmware upgrade.

The module supports synchronous voice transmission as well as asynchronous data transfer.

File Name: SieMo_S50037 Data Book.doc Page 2/30