SieMo S50037 Data Book PRELIMINARILY
Because this Bluetooth™ radio module is very small and intended to be integrated/installed in final products (OEM products/applications) it is not practicable to place the label including the CE conformity marking on it. Therefore the required labelling information is placed in this technical description/installation manual of this radio module. However the CE conformity marking refereed to in R&TTE Directive, Article 12 is displayed on the packaging of the radio module in an appropriate form.
OEM products/applications, where this Bluetooth™ radio module is integrated/installed in, has to be labelled in accordance with R&TTE Directive, Article 12.
An auxiliary label is included in the packaging of this radio module, which can be used for that purpose and has to be permanently affixed to the OEM product/application or to it's data plate and to it's packaging and to accompanying documents. The label has to be affixed visibly (label data must be visible from the outside of the equipment enclosure) legibly and indelibly.
Note that in case of using the provided auxiliary label, additionally following statement has to be included in the users manual of the final product (OEM product/application):
Note that the radio frequency band used by this equipment is not harmonised throughout the European Community. According to the R&TTE directive 1999/5/EC is this equipment
a ‘Class 2’ equipment and marked accordingly with the assigned Class Identifier.
United States of America (USA)
This Bluetooth radio module complies with part 15 of the Federal Communications Commission (FCC) Rules and labelled in accordance with the FCC Rules.
FCC ID: P6L-SieMo-S50037
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Because this Bluetooth™ radio module is very small and intended to be integrated/installed in OEM products/applications it is not practicable to place the label including the FCC statement on it. Therefore the required labelling information is placed in this chapter of the technical description/installation manual of this radio module. However the FCC identifier is displayed on the packaging of the radio module in an appropriate form.
OEM products/applications, where this Bluetooth™ radio module is integrated/installed in, has to be labelled in accordance with FCC Rules (section 15.19 and 47 CFR Ch. I: §2.925, §2.926).
An auxiliary label is included in the packaging of this radio module, which can be used for that purpose and has to be permanently affixed to the OEM product/application in a readily visible (label data must be visible from the outside of the equipment enclosure) manner (e.g. on an exterior surface of the equipment).
27/30
