Siemens S7-300 manual To accomplish this, you will perform the following tasks

Welcome to the “S7-300 Getting Started for First Time Users”. Using an example of a conveyor belt, we will illustrate how easy it is to control a drive motor with an S7-300. You will use the S7-300 to start the motor, switch the direction of rota- tion, and then stop the motor again.

To accomplish this, you will perform the following tasks:

•Install the required software.

•Install and wire the required control components.

•Configure the hardware using the STEP 7 Lite software, and download a con- trol program.

•Start the motor.

The example will take approximately 1 hour to implement, depending on your prior knowledge.

3

SIMATIC S7-300 Getting Started for First Time Users Getting Started, 04/2007, 6ZB5310-0NC02-0BA0