Installation 2-7
Series
505 High Speed Counter
and Encoder Module User
’
s Manual
2.3 Inserting the Module in the I/O Base
The
HSC is a single-wide module. Insert it into any available slot on any
Series 505 I/O base. Do not touch the printed circuit board while inserting
the module. This could cause electrostatic damage to the components on
the board. Insert the module as shown in Figure 2-3.
! T
o minimize potential shock, tur
n of
f power to the I/O base and any
modules installed in the base befor
e inserting or r
emoving a module.
Failur
e to do so may r
esult in potential injury to personnel or damage to
equipment.
Base Plane
Connectors
3ĂĂĂ(2.6ĂĂ)ĂmaxĂ 
Figure 2-3
Inserting the Module into the I/O Base