Siemens SL84A, SL95A, SL34A manual Ilus, Cancelling and Changing a Cycle Front Control

Cycle Countdown

88

Power Regular Delicate/ Rinse &

Scrub Wash Econo Hold

Plus

Cancel

Drain

E n g l i s h

(Interrupting and Cancelling Cycles, Continued)

Interrupting a Cycle

Top Control

WARNING: YOU COULD BE SERIOUSLY SCALDED IF YOU OPEN THE DISHWASHER DOOR QUICKLY DURING A WASH OR RINSE CYCLE. ALWAYS WAIT AT LEAST 10 SECONDS (OR UNTIL WATER NOISES STOP) BEFORE FULLY OPENING THE DISH- WASHER DOOR.

1.Open the dishwasher door far enough to expose the control buttons.

2.To resume the cycle, simply close the dishwasher door.

Cancelling and Changing a Cycle Front Control

1.Press and hold for three seconds the two buttons indicated by the two dots labelled “Cancel Drain”, as shown in Figure

2.You may now begin a new cycle by following the instructions in the “Operate the Controls” section of this manual.

Figure 24/Ilus. 24

Top Control

WARNING: YOU COULD BE SERIOUSLY SCALDED IF YOU OPEN THE DISHWASHER DOOR QUICKLY DURING A WASH OR RINSE CYCLE. ALWAYS WAIT AT LEAST 10 SECONDS (OR UNTIL WATER NOISES STOP) BEFORE FULLY OPENING THE DISH- WASHER DOOR.

1.Open the dishwasher door far enough to expose the control buttons.

2.Press and hold for three seconds the two buttons indicated by the two dots labelled “Cancel Drain”.

3.Close the dishwasher door.

4.You may now begin a new cycle by following the instructions in the “Operate the Controls” section of this manual.

30 Operation Fonctionnement Operación