Siemens SL34A Check/Clean the Spray Arms, Check/Clean the Stainless Steel Inner Door and Tub

Models: SL95A SL84A SL34A

1 66
Download 66 pages 38.02 Kb
Page 47
Image 47

Figure 44/Ilus. 44

Figure 45/Ilus. 45

A Figure 46/Ilus. 46 B

Figure 47/Ilus. 47

E n g l i s h

(Care and Cleaning Continued)

handle and the arrow on the Fine Filter should point to each other, as shown in the circle labelled A in Figure 40.

4.Gently pull the ring handle to ensure that the Assembly is locked into place.

Check/Clean the Spray Arms

Occasionally check the spray arms to ensure that the spray nozzles are clear and unobstructed. If the nozzles require cleaning, the spray arms are easy to remove and reinstall.

To remove the lower spray arm:

1.Pull the empty lower rack out of the dishwasher tub.

2.Grasp the lower spray arm, as shown in Figure 44, and gently pull the lower spray arm upward, as shown in Figure 45.

If the spray nozzles need cleaning, flush them under running water.

To reinstall the lower spray arm:

1.Gently press the lower spray arm back into its installed position.

To remove the upper spray arm:

1.Remove the empty upper rack from the dishwasher. The procedure for removing the upper rack is on page 18 of this manual.

2.Turn the rack upside-down. The upper spray arm is held in position by a locking nut, as shown in Figure 46A. Turn the locking nut counter-clockwise 1/8 turn and remove it, as shown in Figure 46B, to release the spray arm.

3.Gently remove the spray arm, as shown in Figure 47.

If the spray nozzles need cleaning, flush them under running water.

To reinstall the upper spray arm:

1.Gently press the upper spray arm back into its installed position.

2.Return the locking nut to its installed position and turn it 1/8 turn clockwise.

3.Return the upper rack to the upper rack roller guides.

Check/Clean the Stainless Steel Inner Door and Tub

Clean the outer edges of the inside door panel regularly to remove food particles that collect there from normal loading. If spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full.

(Continued on Next Page)

46

Care and Cleaning Entretien et Nettoyage Cuidado y Limpieza

Page 47
Image 47
Siemens SL34A, SL95A, SL84A manual Check/Clean the Spray Arms, Check/Clean the Stainless Steel Inner Door and Tub