Siemens SL95A, SL84A, SL34A manual Check/Clean the Large Object Trap, Care and Cleaning

Models: SL95A SL84A SL34A

1 66
Download 66 pages 38.02 Kb
Page 45
Image 45

A

Figure 40/Ilus. 40

Figure 41/Ilus. 41

Figure 42/Ilus. 42

Figure 43/Ilus. 43

E n g l i s h

(Care and Cleaning Continued)

dishwasher to completely drain into a bucket or other appropriate receptacle.

Check/Clean the Large Object Trap

Your Siemens dishwasher has a filter system made up of a Large Object Trap/ Cylinder Filter Assembly, as shown in Figure 41, and a Fine Filter on the floor of the dishwasher tub, as shown in Figure 42. Some models have an additional Micro Filter under the Fine Filter, as shown in Figure 43. Check with the Model Features Chart on page 6 of this manual to see if your model has the additional Micro Filter. During normal use the filter system is self-cleaning. For your convenience the filter system is accessible and and easily cleaned.

The Large Object Trap prevents large objects such as bones, glass, toothpicks and straws from entering the pump system and causing damage or noise. Frequently inspect the Large Object Trap and clean the filter system whenever you find foreign objects.

To Remove the Large Object Trap:

IGrasp the ring handle, as shown in Figure 40. Turn the ring handle counter-clockwise 1/4 turn and lift out the Large Object Trap/ Micro Filter Assembly, as shown in Figure 41.

WARNING: DO NOT REACH INTO THE LARGE OBJECT TRAP, AS IT MAY CONTAIN SHARP OBJECTS.

2.Carefully examine the Large Object Trap.

3.If you find debris in the Large Object Trap, turn it upside-down and gently tap it on a surface such as a countertop to dislodge and remove the debris. Flush the Large Object Trap clean by holding it under running water.

4.You may also remove the other filter system components, as shown in Figures

42and 43, and flush them clean by holding them under running water.

To Reinstall the Large Object Trap:

1.If you have removed the other filter system components, return them to their places, Micro Filter first (if your model has it), Fine Filter second, and the Large Object Trap/Cylinder Filter Assembly last.

2.Firmly press the Large Object Trap/Fine Filter Assembly into position.

3.Turn the ring handle clockwise 1/4 turn until it is locked. The arrow on the ring

(Continued on Next Page)

44

Care and Cleaning Entretien et Nettoyage Cuidado y Limpieza

Page 45
Image 45
Siemens SL95A, SL84A, SL34A manual Check/Clean the Large Object Trap, Care and Cleaning, To Remove the Large Object Trap