Sierra Wireless 20080605 Power Connector

Specifications

Rev 1.0 Oct.09 13

Power Connector

Figure 2-1: Power Connector (not to scale)

Warning:

Explosion Hazard - Do not disconnect

equipment unless power has been switched off or

the area is known to be non-hazardous.

Note: Raven XE I/O Port 4 is software configurable.

*ConfigurationterminologyinACEmanager

Contents

Main Contents Page Important Notice Safety and Hazards Limitation of Liability Patents Copyright Trademarks Preface Rev 1.0 Oct.09 iii Contact Information Revision History 1: Introduction to the Raven XE ALEOS ACEware Page Modem Doctor Connecting to your cellular provider Dynamic vs. Static IP Addresses Communication Connection methods USB Virtual serial port Networking IPSec GRE Applications Events Reporting Software Documentation Tools and Reference Documents 2: Specifications Power Connector Page Page Power Connector 3: Activating Raven XE on your cellular provider Installing the SIM Configuring the APN Installing the SIM 1. Before you start 1. Opening the Case 2. Remove the SIM from the card 3. Insert the SIM 4. Finishing the SIM installation Configuring the APN 4: Hardware Installation of the Raven XE Connecting to Power Connecting to a Computer or other Device Indicator Lights Mounting Connecting to Power Warning: Connecting to a Computer or other Device Warning: The USB port can only be used in a non- hazardous environment. Indicator Lights Page Mounting Page Page 5: Connecting the Raven XE ACEmanager Using a Terminal Application with AT Commands AT Command ACEmanager Using a Terminal Application with AT Commands 1. Choose a name and icon for your connection. 2. Connect To 3. Connected Page AT Command