4: Hardware Installation of the Raven 4
XE
•Connecting to Power
•Connecting to a Computer or other Device
•Indicator Lights
•Mounting
Note: During installation, please |
| Your Raven XE should be mounted in a position that allows | ||
be sure that the cables are |
| easy access for the cables so they are not bent, constricted, in | ||
secure but do not bear any |
| close proximity to high amperage, or exposed to extreme | ||
additional weight that could |
| temperatures. The LEDs on the front panel should be visible | ||
loosen the connector from the |
| for ease of operational verification. You should ensure that | ||
unit. |
| there is adequate airflow around the modem but that it is kept | ||
|
|
| free from direct exposure to the elements, such as sun, rain, | |
|
| |||
|
|
| dust, etc. | |
|
|
|
|
|
|
|
| Caution: The Raven XE is in a hardened case and designed for use | |
|
|
| in industrial and extreme environments. However, unless you are | |
|
|
| using cables expressly designed for such environments, they can fail | |
|
|
| if exposed to the same conditions the Raven XE can withstand. | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: This device is not intended for use within close proximity of the human body. Antenna installation should provide for at least a 20 CM separation from the operator.
Figure 4-1: Raven XE Connectors
Antennas selected should not exceed a maximum gain of 5 dBi under standard installation configuration. In more complex installations (such as those requiring long lengths of cable and/ or multiple connections), it’s imperative that the installer follow maximum dBi gain guidelines in accordance with the radio communications regulations of the Federal Communica‐ tions Commission (FCC), Industry Canada, or your country’s regulatory body (if used outside the US).
|
|
|
|
|
|
|
Rev 1.0 Oct.09 |
|
|
|
|
| 18 |
|
|
|
