7: Configuring the MP Modem to Report GPS and I/O Data
•I/O device installation The MP modem is capable of reporting position and heading
and configuration | information using the embedded GPS module, as well as the |
| status of sensors, gauges, and alarms connected to the I/O |
| (Input/Output) port. The MP modem is typically installed in a |
| fleet of vehicles with the GPS and/or I/O data being sent to a |
| central office or dispatch for processing. |
| This chapter describes how to implement local reporting of |
| GPS and I/O data. Chapter 8 describes how to configure your |
| MP modem to exchange data with your private network. |
GPS configuration and reporting
GPS receivers use an array of orbiting satellites operated by the United States Department of Defense to triangulate their coordinates on the Earth’s surface. In order to use the GPS module in the MP modem, a GPS antenna must be connected to the MP modem. (The installation requires either two
For more information about GPS, see the Primer on GPS Opera‐
tions (document #2130313) on the Sierra Wireless web site, www.sierrawireless.com.
|
|
|
|
|
|
|
Rev 1.4 Draft Mar.08 |
|
|
|
|
| 55 |
|
|
|