VIEWING IMAGES ON A TV

The DP2 camera can be connected to a television or a video device using the provided AV cable, allowing the recorded images to be viewed on the television monitor or recorded on video recording media.

TO CONNECT THE CAMERA TO A

VIDEO DEVICE

1

Open the connector cover.

2

Connect the AV cable to theUSB / AVterminal on the camera body.

3

Connect the yellow AV cable plug into the video input terminal and the white plug into the audio terminal of the TV

4

Turn on the camera and video device.

WARNING !!

Please do not use any video cable other than the one provided with your Sigma DP2 camera. Using other brands may cause damage.

TIP

It is recommended that the camera be powered with the AC adapter (optional) during television playback to avoid draining the battery.

The default mode for the video signal is NTSC. When connecting the camera to a PAL device, the Video Mode setting in the Camera Set-up menu must be changed. (See P.112)

85

Page 86
Image 86
Sigma C72900, DP2 user manual Viewing Images on a TV, To Connect the Camera to a Video Device