SPECIFICATIONS

Burst Rate

HI Mode: 1.9fps for 6 frames, MED Mode: 2.4fps for 14 frames,

LOW Mode: 2.5fps for 30frames

 

External Flash Synchronization

Hot shoe (contact X, with dedicated flash linking contact)

LCD Monitor Type

1.8”, Color TFT LCD with appr. 130,000 dot low –temp.

polysilicon, Coverage Area : 100%, Backlight : White LED

 

Reviewing Images

Single-Image display, Zoom-in display,

9 segments thumbnail display, Slide Show

 

Language

Japanese / English / French / Germany

 

Battery

Lithium CR(DL)123A x 2pcs.

Power Source

Lithium CR-V3 x 2pcs or “AA” Ni-Mh x 4pcs or Nickel

 

Zinc Primary Battery x 4pcs

 

 

 

AC Adapter

Dimensions

152mm / 6”(W) x 120mm / 4.72”(H) x 79mm / 3.1”(D)

Weight

785g / 25.2oz (without battery)

CONNECTING YOUR CAMERA TO A COMPUTER

The SD10 camera can be connected directly to a computer using the provided USB or IEEE 1394 (FireWireTM) cable. Make sure that the camera is off before connecting it to the computer. Data transfer rates will vary depending on the computer and operating system used. The fastest transfer rates can be obtained using IEEE 1394. For further information, please refer to the SIGMA Photo Pro User Guide, which is available in PDF format on the supplied CD-ROM.

CONNECTING THE CABLESUSB Cable

zThe shutter button and color LCD monitor will be disabled while the camera is connected to the computer via a USB cable.

zThe camera will shut down after 15 minutes of inactivity—no images being transferred—when connected to the computer via a USB cable.

IEEE 1394 (FireWire™) Cable

zConnect the IEEE1394 (FireWire™) directly to the computer please be sure that the other end of the cable can be connected to the computer’s IEEE 1394 terminal.

WARNING!!

IEEE1394 Terminal (FireWire™)

USB Terminal

•Please use only the USB or IEEE 1394 cables supplied with your camera.

114