MARKING IMAGES

TO MARK A SINGLE IMAGE

1

Use the ＜／／ ／ ＞ arrows on the

4-way controller to select the image to be marked in Contact Sheet or Single-Image View.

2

Press ＜ MOD＞ to display the Modification

Menu.

3

Use the ＜ ／ ＞ arrows on the 4-way controller to select the Mark Menu.

4

Use the ＜ ／ ＞ arrows on the 4-way controller to select “Mark”.

•If the selected image is already marked, the “Mark” menu item will change to “Unmark”.

5

Press ＜ OK＞ to mark the image. A flag icon will appear in the upper-right corner of the image indicating that the image is marked.

TIP

•To unmark a marked image, select the marked image and follow the same steps as above.

•If the Mark Menu was opened from Jump Mode, the “Mark” menu item will not be available.

•The ＜ OK＞ button can be used as a shortcut key for marking images. (See P.90)

86