SHOWING A SLIDESHOW

TO STOP/PAUSE A SLIDESHOW

Press ＜ CANCEL ＞ to stop a slideshow and return to the previous view (Single-Image, Contact Sheet, etc.).

•The image that the slideshow stops on will become the currently selected image.

TO RESUME A STOPPED SLIDESHOW

1

Press ＜ MOD＞ to display the Modification

Menu.

2

Use the ＜ ／ ＞ arrows on the 4-way controller to select the Slideshow Menu.

3

If not already selected, use the ＜ ／ ＞ arrows on the 4-way controller to select “Resume show”.

4

Press ＜ OK＞ to close the Modification Menu and resume the slideshow.

•The slideshow will resume with the next image in the sequence following the one the slideshow was stopped on.

TIP

•It will not be possible to resume a slideshow that has stopped automatically after the last image. (See P.95 for setting slideshow repetition.)

•Pressing ＜ MENU＞, ＜ VIEW＞ or the shutter release will also stop a slideshow, however, it will not be possible to resume a slideshow stopped in this manner.

94