BULB SETTING

When long time exposures are required (for shooting night scenes or very dark subjects) the use of the “Bulb” setting is recommended. Please use tripod when taking pictures with this setting. Bulb photography can be performed only when ISO sensitivity is set to ISO100 and 200. (Please refer to P.52 about setting ISO sensitivity.)

1

Set the dial to the “D”-Dial on the “Drive Area”

(P.14).

2

Set the “Mode”-Selector to the “M” position.

3

Turn the “S” –Dial until “bulb is displayed on the top LCD panel. And select the aperture value by “C” –Dial.

4

Depress the shutter button fully to take the picture.

CAUTION !!

•Bulb photography is possible only when ISO sensitivity is set to ISO100 and 200. Bulb photography cannot be performed at ISO 400 and ISO 800.

•If extended mode is selected, you can use bulb photography upto 30sec. in any ISO settings.（see P.62）

•Self-timer function and the bulb exposure function cannot operate together. If the “D”-dial set to self-timer function in “bulb” exposure mode, the shutter defaults to 1/180 second for SD10.

42