6.When asked, All data in selected drive will lost! Continue (Yes/No)?, select Yes, then press Enter.
7.Select RAID, then select Rebuild.
8.Press Enter. The mirror will begin rebuilding. Do not interfere with the process.
9.When rebuilding is finished, select Exit, then press
Enter
10.When asked Are You Sure to Exit(Yes/No)?, select Yes, then press Enter to exit and reboot.
To Rebuild the Mirror while in Windows
1.Replace the failed drive(s) with one of equal or greater capacity, then start the computer.
2.When Windows resumes, click Start/Programs or All Programs/Initio SATA RAID/Initio RAID Manager.
3.Double click Initio SATA RAID Manager icon from the system tray to bring up the application.
4.Click Mirror Array, then click Tasks.
5.Click Rebuild Array, then click OK.
6.The mirror will rebuild. Rebuild time is dependent on the size of the mirror set.
Deleting RAID Arrays
1.As the BIOS boots press Ctrl+R when prompted to enter the RAID BIOS.
2.Select RAID, then press Enter.
3.Select the Delete, then press Enter.
4.Select Exit, then press Enter.
5.When asked Are You Sure to Exit(Yes/No)?, select Yes, then press Enter to exit and reboot.
6
