Table 9. FM Receiver Characteristics1,2 (Continued)
(VDD = 2.7 to 5.5 V, VIO = 1.5 to 3.6 V, TA =
Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|
|
|
|
|
|
|
Seek/Tune Time6 |
| RCLK tolerance | — | — | 80 | ms/channel |
|
| = 100 ppm |
|
|
|
|
|
|
|
|
|
|
|
Powerup Time6 |
| From powerdown | — | — | 110 | ms |
RSSI Offset12 |
| Input levels of 8 and | — | 3 | dB | |
|
| 60 dBµV at RF Input |
|
|
|
|
|
|
|
|
|
|
|
Notes: |
|
|
|
|
|
|
1.Additional testing information is available in Application Note AN388. Volume = maximum for all tests. Tested at RF = 98.1 MHz.
2.To ensure proper operation and receiver performance, follow the guidelines in “AN383: Antenna Selection and Universal Layout Guidelines.” Silicon Laboratories will evaluate schematics and layouts for qualified customers.
3.FMOD = 1 kHz, 75 µs
4.Δf = 22.5 kHz.
5.BAF = 300 Hz to 15 kHz,
6.Guaranteed by characterization.
7.VEMF = 1 mV.
8.f2 – f1 > 2 MHz, f0 = 2 x f1 – f2. AGC is disabled. Refer to "6. Pin Descriptions:
9.Δf = 75 kHz.
10.At LOUT and ROUT pins.
11.Analog audio output mode.
12.At temperature (25°C).
Rev. 1.0 | 13 |