Interrupting the alarm
•Press the SNOOZE button to interrupt the alarm for 10 minutes.
Set snooze time
•Press the MODE button seven times; the screen displays the snooze time set
(default is SNO10).
•Use the UP and DOWN buttons to set the snooze time to a time between 1 and 59 minutes.
Turning off the alarm function
•Press the
Stop watch function
The stop watch function is only available when the radio is switched off.
•Press and hold down the PAGE button for around 2 seconds, the screen shows 00.00.0 U.
•Press SNOOZE to start the stop watch. The maxi- mum time for the stop watch is 99 minutes and 59 seconds. If the stop watch exceeds the maxi- mum time, 99:59.0 is displayed and flashes.
•During time measurement, it can be stopped by pressing SNOOZE.
•Pressing SNOOZE again restarts the stop watch.
•Hold down SNOOZE to reset the stop watch.
•Leave the stop watch by pressing PAGE.
Countdown function
The countdown function is only available when the radio is switched off.
Set and save countdown
•Press and hold down the MEMORY SCAN button for around 2 seconds, the screen shows
D 00.00.
•Press the UP or DOWN button to set the desired time.
5 countdown times are preset on the memory buttons and you can open these directly using the corresponding memory button:
Button M.0/5 10:00
Button M.1/6 30:00
Button M.2/7 45:00
Button M.3/8 60:00
Button M.4/9 90:00
•Press the MEM button to save the set time, the memory space indicator MEM flashes on the screen. Now use the
•When the MEMORY SCAN button is pressed again you leave the countdown mode.
Call up and activate the countdown function
•Press and hold down the MEMORY SCAN button for around 2 seconds, the screen shows
D 00.00.
•Select the desired, saved countdown time with the aid of the
•Press SNOOZE to start the countdown. Pressing the SNOOZE button again pauses the countdown.
- 10 -
