Silvercrest KH 2029 manual Disposal, Risk of injury from electric shock, Cleaning the housing

Selecting a saved station

•In order to select a saved station directly, first use the frequency selection switch to select the frequency range where the station is saved.

•Press the PAGE button and then use the UP or DOWN buttons to select a memory page (from 00–39).

•Within 10 seconds press the M.0/5–M.4/9buttons to select a memory space to store the station.

The station is played immediately after entering the memory space.

Cleaning

Risk of injury from electric shock!

•Never immerse the device’s parts into water or other liquids!

•Do not allow liquid to penetrate the housing.

Cleaning the housing

Clean the housing surface with a slightly damp cloth. Never use petrol, solvent or detergents that could attack the plastic!

Carry out automatic station search

Your world receiver can search the frequencies with- in a range and store the stations it finds. Do the fol- lowing to activate the automatic search (automatic memory scan/AMS):

•Press the MEM button once. The MEM message flashes.

•Hold down the MEMORY SCAN button for about 1 second.

The world receiver now searches all frequencies in the currently selected frequency range and saves the stations it finds from the currently set memory page and memory space.

Displaying memory spaces

•Press the MEMORY SCAN button to call up the content of all station memories for the selected band.

All stored stations will be played in succession for about five seconds.

•Press any button to stop playing the memory spaces.

Disposal

Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC.

Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Battery disposal

Batteries may not be disposed of with normal domestic waste. All consumers are statutorily obliged to dispose of batteries at the collection po- int in their community/district or with the

original supplier.

The purpose of this obligation is to ensure that batteries can be disposed of in an environmentally friendly manner. Only dispose of batteries when they are fully discharged.

Disposal of packaging

Dispose of all packaging materials

in an environmentally friendly manner.

- 13 -