iTA / TP (Traffic Announcement/Traffic Program): Function to receive traffic updates.
iEON (Enhanced Other Networks): If TA / TP function is activated, while listening to a broadcasting of a radio station the programme switches automatically as soon as traffic updates are broadcast. Traffic updates are then broadcast at a
iPTY (Program Type): Function to receive special program (e.g. rock music).
iHiFi (High Fidelity): Quality standard for audio replay devices.
iDIN 8 pole plug: adapter to connect electronic HiFi device in accordance with DIN standard (e. g. CD changer connection to a MP3 car radio recorder).
iISO plug: Adapter to connect electronic HiFi devices in accordance with International Organization for Standardization.
LPreparation
The following auxiliaries and tools are required for the connection and for the assembly, which are not included in the delivery:
1 x ISO plug to connect car’s loudspeaker 1 x ISO plug to make 12 V DC connection
1 x Powered aerial connection with connector 1 x Pair of loudspeakers impedance
(incl. feed line)
3 x Fuse holder with fuse 15 A
1 x DIN assembly
1 x Stripping tongs or cable stripping knife 1 x Screw driver
1 x Spanner with 8 mm opening 1 x Biro
To connect an antenna already installed in the vehicle you may need:
1 x Antenna adapter (in accordance with the Technical Data for the antenna)
To connect a CD changer you require:
1 x Connecting line with
Safety / Preparation / Installation
To connect a final amplifier you require: 2 x Cinch connecting cable
(insulation and plug: white / red)
For the connection of a portable audio device you require:
1 x Cinch connection cable / 3.5 mm jack (insulation and plug: white / red)
To record MP3 or WMA formats you require:
1 x MMC approx. 1 GB storage capacity or
1 x SD approx. 1 GB storage capacity or
1 x USB memory stick approx. 1 GB storage capacity
LInstallation
LRemoving the control panel from the car radio
•Avoid hard contact with the display window 3.
•Press the “Open” button 4and allow the control panel 1to reach the horizontal position.
•Push the control panel 1slightly to the left and pull it forwards.
•Store the control panel in the plastic box (see also the illustration in the section “Attaching the Control Panel”).
LInstallation of the DIN assembly bracket into the car’s instrument panel
•Completely unscrew the safety transport screws gpfrom the metal casing dt(see Fig. E) and carefully remove the plastic frame 2 from the front of the device ct.
•Release the attachment points by slightly raising the upper frame edge and pulling it carefully towards the front.
•Push the two installation keys between the
GB/IE 11
