Operation
EON: (ON / OFF): EON function on or off.
•Turn the “SEL / VOL” control knob cpuntil the display 3reads [EON ON]; the EON function is now activated.
•Turn the “SEL / VOL” control knob cpuntil the display 3reads [EON OFF]; the EON function is now deactivated.
DSP: (NONE / CLAS / ROCK / POP / FLAT): Selection of an acoustic pattern for various playback styles of music and language with preset bass and treble levels.
•Turn the “SEL / VOL” control knob cpuntil [NONE] appears in the display window 3. The acoustic pattern of your setting for [BAS] and [TRE] is selected.
•Turn the “SEL / VOL” control knob cpuntil [CLAS] appears in the display window 3; the acoustic pattern for classical music is selected.
•Turn the “SEL / VOL” control knob cpuntil [ROCK] appears in the display window 3; the acoustic pattern for rock music is selected.
•Turn the “SEL / VOL” control knob cpuntil [POP] appears in the display window 3; the acoustic pattern for pop music is selected.
•Turn the “SEL / VOL” control knob cpuntil [FLAT] appears in the display window 3; the acoustic pattern for speech is selected.
Your settings are automatically stored.
The device automatically changes back to playback mode after five seconds.
LAdjusting volume
•Increase the volume by turning the “SEL / VOL” control knob cpclockwise.
•Reduce the volume by turning the “SEL / VOL” control knob cpcounter clockwise.
Mute Function
The mute function enables you to turn off the loudspeakers.
• | Press the | MU | button cl. Playback is muted | |
|
| and [MUTE] appears in the display window 3. | ||
• | Press the |
| button clagain. Playback | |
MU | ||||
16 |
| GB/IE |
|
|
|
|
| ||
|
|
|
|
|
continues as before the MUTE function was activated and [MUTE] disappears from the display window 3.
Loudness Function
The loudness function increases the playback level of the bass sounds when the volume is low.
•Press the • LD / MD button buand keep it held down for approximately 2 seconds. The loudness function is activated, [LOUD ON] appears in the display window 7followed by [LOUD].
•Turn the “SEL / VOL” control knob coagain. [LOUD OFF] appears in the display window.
•Press the • LD / MD button buagain and keep it held down for approximately 2 seconds. The loudness function is deactivated, [LOUD OFF] appears in the display window 3followed by [LOUD].
LSetting the 3-Band PLL Tuner
Press the • LD / MD button buuntil TUNER appears in the display window 3.
You can select 3 x FM frequency bands (FM1, FM2 and FM3), 2 x medium wave frequency bands (MW1 and MW2) and 1 x long wave frequency band. Each frequency band has six presets on which you can store radio stations.
•Press the BD / ENT button bsand select the frequency band you wish to receive. In the display window 3you will now see the designation of the frequency band (e.g. [FM2]), the frequency (e.g. [99.20]) of a radio station that is being received or the programme ID during stereo reception and [TP] for traffic information.
Automatic Station Search
•Start the station search at lower frequencies
by briefly pressing the 9 button 6. The tuner automatically plays back the next radio station that it receives and shows the information in the display window 3.
•Start the station search at higher frequencies
by briefly pressing the : button 5. The tuner automatically plays back the next radio station that it receives.
