Silvercrest KH 2380 operation manual Connection with CD Changer, Tip

cable for 12 V DC ignition current of the vehicle. In this manner the car radio and an electric aerial can only use current from the vehicle when the ignition is switched on.

•Connect the cable for the vehicle’s minus/ ground connection plug-in fpwith the help of a biscuit connector with the car’s connection cable for the minus pole (battery’s minus pole which by standard is connected with the car’s chassis).

LConnection with CD Changer

Tip! Use a connecting cable with DIN 8-pole plug.

A standard CD changer with DIN 8-pole connector can be connected to the device.

•Install the connecting cable with the DIN 8-pole plug in accordance with its operation manual in the car.

•Guide the connecting cable with the DIN 8-pole plug to the CD changer and carefully out of the front of the DIN assembly bracket.

•Insert the DIN 8-pole plug of the connecting cable until it catches into the DIN 8-pole plug jack AUX fqto the rear of the casing.

•Insert the DIN 8-pole plug to the other end of the connecting cable until it catches into the DIN 8-pole plug-jack AUX of the CD changer.

Installation

cable as far as it will go into the OUT / REAR cinch R plug jack (amplifier connection [red / rear right]) fu.

•Then insert the two red plugs of the first cinch connection cable as far as it will go into the REAR cinch R plug jack (amplifier connection [red / rear right]) of the amplifier.

•Insert the white plug of the first cinch connection cable as far as it will go into the OUT / REAR cinch L plug jack (amplifier connection [white / rear left]) gl.

•Then insert the second white plug of the first cinch connection cable as far as it will go into the REAR cinch L plug jack (amplifier connection [white / rear left]) of the amplifier.

•Insert the red plug of the second cinch connection cable as far as it will go into the OUT / FRONT cinch plug jack (amplifier connection [red / front right]) gm.

•Then insert the second red plug of the second cinch connection cable as far as it will go into the FRONT cinch plug jack (amplifier connection [red / front right]) of the amplifier.

•Insert the white plug of the second cinch connection cable as far as it will go into the OUT / FRONT cinch plug jack (amplifier connection [white / front left]) gn.

•Then insert the second white plug of the second cinch connection cable as far as it will go into the FRONT cinch plug jack (amplifier connection [white / front left]) of the amplifier.

L Connection of an amplifier L Connecting a portable audio device

Tip!

Use two cinch connection cables (insulation and plug: white / red).

One amplifier per speaker output channel can be connected to the device.

•Install the two cinch connection cables in the vehicle according to their operating instructions.

•Pass two cinch connection cables to the amplifier and carefully out of the front of the DIN assembly bracket.

•Insert the red plug of the first cinch connection

For establishing a cinch connection to any audio source the headphone output (3.5 mm stereo jack) of any audio device (e.g. MP3 player) can be connected to the car radio.

Use a 3.5 mm jack plug connection cable to 2x cinch plugs.

•Guide the cinch connection cable to the portable audio device and carefully out of the front of the DIN assembly bracket.

•Insert the red plug of the cinch connection cable as far as it will go into the LINE IN R

GB/IE 13