Handling and operation

Adjusting the display brightness

Prerequisite: The device is in the operational mode clock/standby operation.

♦Press the Bass/AMS/Mode 7 button three times. The current setting for the display brightness is shown (H=bright or L=dim).

♦Set, with the button Tune+ 13, the display brightness to H if you want the display to be brighter.

♦Set, with the button Tune– 12, the display brightness to L if you want the display to be darker.

♦Press the Bass/AMS/Mode 7 button again to save the current setting and move to the next menu item.

Setting the memory function

You can set up to 10 date reminders to which an automatic reminder will be triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for example, of birthdays or other recurring events. The reminder occurs every year on the same date.

Prerequisite: The device is in the operational mode clock/standby operation.

♦Press the Bass/AMS/Mode 7 button four times. The current setting of the selected reminder date is shown alternating with the indicator SDA. Next to the indicator SDA is the number of the memory slot for that date. Possible

reminders are SDA 0 to SDA 0.

♦Select with the buttons Preset+ 11 and Preset– 10 the memory slot for the date to be set.

♦Set with the buttons Tune+ 13 and Tune– 12 the date for this memory slot. With each button press the date is changed by one day. Holding down the respective button for more than 2 seconds starts the speed setting.

NOTICE

►Press the button AOT 5 if you want to switch off the reminder function for the currently selected memory slot. In the display -- -- is shown.

♦Press the button Lock/Mem. 6 to set the time of day at which the reminder function is to be triggered. The setting is carried out with the buttons Tune+ 13 and Tune– 12 on the hour between 00 and 23. This setting applies to all programmed reminder dates

♦Press the Bass/AMS/Mode 7 button again to save the current setting and move to the next menu item.

GB

IE

SKRD 30 A1

13