Handling and operation

Handling and operation

In this section you receive important information for the handling and operation of the device.

Switching On and Off

After the device has been connected to the power supply it is already switched on. Via the On/Off 4 button you switch between the operational modes clock/ standby operation and radio.

NOTICE

►The On/Off switch 4 does not disconnect the device completely from the mains power. To completely disconnect the device from the mains power the mains power cable plug 16 must be pulled from the mains socket.

Basic settings

After the device has been connected to the mains power supply it shows the time of day and the day of the week in the display 3 . The device is in the operational mode clock/standby operation.

Activating the settings menu

To activate the settings menu, whilst in the operational mode clock/standby operation, press the Bass/AMS/Mode 7 button. The time of day, shown in the display 3 , begins to blink. Each further actuation of the Bass/AMS/Mode 7 button switches to the next setting potential. The menu item sequence is:

▯Setting the time of day

▯Setting the date

▯Adjusting the display brightness

▯Setting the memory function

▯Setting the time of day format

NOTICE

►The setting menu ends automatically if you do not actuate any buttons for approx. 15 seconds. The executed setting is saved.

GB

IE

SKRD 30 A1

11