Silvercrest SKRD 30 A1 Waken with radio, Switching the alarm oﬀ, When the wake time has arrived

Handling and operation

Waken with radio

If you want to be woken by the radio, before activating the wake time carry out the following settings:

♦Switch the radio on by pressing the On/Oﬀ 4 button.

♦Select the station with which you want to be woken (see section Station setting).

♦With the VOLUME 14 knob set the desired volume (see section Volume settings).

♦Switch the radio oﬀ by pressing the On/Oﬀ 4 button.

♦To select "Radio" for the respective alarm press the Alarm1 button 8 or the Alarm2 button 9 several times in succession until, in the display 3 , the

symbol appears.

Switching the alarm oﬀ

Prerequisite: The device is in the operational mode clock/standby operation.

♦To switch oﬀ the respective alarm press the Alarm1 button 8 or the Alarm2 button 9 several times in succession until no symbols are shown in the display 3 .

When the wake time has arrived

With the setting "Wake with alarm tone" a fourfold signal tone sounds in intervals of 2 seconds. The volume of the signal tone will continually increase until the maximum volume has been reached. The duration of the wake signal is restricted to 10 minutes.

With the setting "Wake with radio" the radio will switch on. The previously selected station will be activated for a maximum of 60 minutes at the set volume.

♦Press the button Snooze/Timer 14 to activate a repeat wake after 9 minutes.

NOTICE

►The repeat wake function is possible up to 60 minutes after the set wake time has arrived.

♦Press the Alarm1 button 8 or the Alarm2 button 9 to end the current alarm.

NOTICE

►The alarm becomes active again when the next wake time has arrived (i.e. on the next day).

18	SKRD 30 A1