Blank
Switches off the video signal and displays a black page. As soon as the key is pressed an OSD indication lasting a few se- conds confirms that the function has been activated. Pressing any further keys on the remote control restores the previous conditions.
Color Temperature
Clicking the key in question again (F1 / F2) enables you to set the colour temperature from High, Medium, Low and User.
Gamma Correction
Successive pressing of the key in question (F1 or F2) makes it possible to select from among the available gamma curves.
SOURCE INFORMATION
When active (YES) each time the source is changed informa- tion is displayed relative to the signal type. If inactive, (NO) no information about the source is displayed.
OSD Background
Determines the type of background for the On Screen Display (opaque transparent).
OSD TIMEOUT
Determines the On Screen Display timeout. The adjustment is made using the ◀ (decrease) and ▶ (increase) keys within a
OSD Position
Allows the On Screen Display to be positioned in a particular area of the projected image. The OSD can be positioned using the arrow keys for fine adjustments or keys 1...9 on the remote control to select one of 9 preset positions.
MEMORIES
The main picture parameters can be saved in discrete sets of values called “Memories” so that they can be subsequently applied as a group using a single command.
There are 6 distinct Memories (Memory 1, Memory 2, Memory
3) for each of the 8 signal types managed:
| 1 VIDEO |
| |
| 2 |
| |
3 | COMP/RGB (YPrPb 15KHz) | 3 | COMP/RGB (RGB 15KHz) |
3 | COMP/RGB (YPrPb 32KHz) | 3 | COMP/RGB (RGB 32KHz) |
| 4 GRAPHICS RGB | ||
5 HDMI
making a total of 24 different available Memories.
The image parameters that can be saved/recalled by the Memories management system are the following:
| Image | Picture |
| ||
| BRIGHTNESS | ASPECT |
| CONTRAST | COLOUR TEMPERATURE |
| COLOUR | OVERSCAN |
| TINT | GAMMA |
| SHARPNESS |
|
| FILTER |
|
| NOISE REDUCTION |
|
|
|
|
|
|
|
Some of these parameters may not be available for certain inputs or certain input signals, as indicated in Tables 4 and 5. The menu page for the Memories management functions is
activated by pressing the key 
on the remote control. The operations that can be performed on each memory se- lected are described here below.
Fig.32
22
