Sim2 Multimedia D80 installation manual Introduction

1 INTRODUCTION

The D80 projector represents the state of the art in image processing combined with the innovative DLP™ sytsem and outstanding optics.

Its range of inputs (1 Composite Video input, 1 S-Video input, 1 Com- ponents or RGB input, 1 graphic RGB input, 1 HDMI™ inputs) allow it to be connected to a wide range of analogue and digital sources: DVD players, video recorders, satellite and terrestrial receivers, computers, video game consoles, camcorders, etc.

Its image processing system allows optimum reproduction of a wide range of input signals, from interlaced video to high definition and digital graphics.

Faithful reproduction of signals at higher resolutions (such as high definition video and graphics) occurs without loss of information or reduction of image sharpness thanks to the processor’s high pixel rate signal acquisition capabilities.

Different input signal resolutions can be adapted to match the specified screen resolution without loss of image quality, thanks to a generous selection of preset aspect ratios, some of which are user definable.

All picture adjustments can be made with the remote control interac- ting with a simple menu-activated On Screen Display; alternatively, the projector can be controlled by a domestic automation system via its serial port.

The appliance has been subjected to exhaustive operating tests by SIM2 to ensure maximum quality.

The projector bulb life should thus initially be around 30-60 hours. Besides the usual checks, the Quality Control department also runs additional statistical tests before despatch.

In this instance the packaging may show signs of having been opened, and the hours operation of the lamp may be higher than the value required under standard procedures.

CONTENTS
1	INTRODUCTION		10 CLEANING AND MAINTENANCE		6
2	IMPORTANT SAFETY INSTRUCTIONS 4
			11	COMMON PROBLEMS	6
3	UNPACKING	7
			12	OPTIONAL ACCESSORIES	7
4	INSTALLATION
				Technical specifications	7
8
				Structure of the on screen menu	8
5	SWITCHING THE PROJECTOR ON AND OFF	10
				Dimensions	0
6	CONNECTIONS	10
				Additional feets instructions	1
7	CONNECTIONS BOARD	12
				Projection distance	
8	REMOTE CONTROL	14
9	ON SCREEN MENU	15
		manual version 1.7 (22-11-2006)
			DLP and DMD are registered trademarks of Texas Instruments.
			HDMI, the HDMI logo and the expression High-Definition Multimedia Interface
			are trade marks or registered marks of HDMI licensing LLC