Sim2 Multimedia SVD 800 HD How to enter the memory manager, How to insert a label, CInema, Wide

(F)indicates which ratio flag was stored by the user during the adjustments.

The horizontal and vertical frequencies are measured by the projector and stored in the relative memory bank each time you save an adjustment. When the projector is switched on the last memory bank used is recalled.

5.8.1How to enter the memory manager

Enter the SERVICE MODE, see par. 3.24 page 15. Press OPT. OPTIONS appear

- OPTIONS -

-MEMORY MANAGER

-INSTALL. TYPE

-MISCELLANEOUS

Fig. 76

Press or . Select MEMORY MANAGER, ENTER

- MEMORY MANAGER -

BANK	01 SIGNAL NAME				PAL
LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	PAL
	02	15.7	60	N	NTSC358
	03	31.5	70	N	DOS-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 100HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	SUN 76HZ
	09	44.9	60	N	ATSC720P

RECALL A BANK FROM MEMORY

Fig. 77

-BANK 01: It indicates that bank 01 has been recalled. It is important when the input frequencies do not match those stored in the bank.

-N.:Bank number

-HOR:Horizontal frequency. It is measured by the software and stored in the memory bank.

-VER:Vertical frequency. It is measured by the software and stored in the memory bank.

-F:Flag. with this function you can change the video format: Normal, Small, Letter box,

CInema, Wide.

-LABEL:Name of the memory bank (label decided by the user).

SVD 800 HD

5.8.2 How to insert a label

Press or . Select LABEL

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	PAL
	02	15.7	60	N	NTSC358
	03	31.5	70	N	DOS-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 100HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	SUN 76HZ
	09	44.9	60	N	ATSC720P

EDIT BANK NAME

Fig. 78

Press or to select in which memory bank you wish to change the label.

Press ENTER. The LABEL will appear in green.

Press or to scroll the letters of the alphabet and use the left or right arrows to move to the next letter.

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	P	AL - - - - -
	02	15.7	60	N		NTSC358
	03	31.5	70	N	DOS-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 100HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	SUN 76HZ
	09	44.9	60	N	ATSC720P

EDIT BANK NAME

Fig. 79

When you have written the right name press ENTER, ENTER. The label will appear written in white with a message under the table.

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	PAL
	02	15.7	60	N	NTSC358
	03	31.5	70	N	DOS-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 100HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	SUN 76HZ
	09	44.9	60	N	ATSC720P

BANK NAME STORED

Fig. 80

5.8.3How to change an aspect ratio

(F)

Press or . Select F.

Press or to select in which memory bank you wish to modify the aspect ratio flag.

Press ENTER, the following figure will appear.

- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL

LOAD	N	HOR VER		F	LABEL
	00	33.7	60	N	ATSC1080
COPY	01	15.6	50	N	PAL
	02	15.7	60	N	NTSC358
	03	31.5	70	N	DOS-VGA
	04	31.5	60	N	VGA-640
MOVE	05	31.2	60	N	31K 100HZ
	06	48.4	00	N	VESA 1024
	07	64.3	60	N	64K 60HZ
DEL	08	71.7	76	N	SUN 76HZ
	09	44.9	60	N	ATSC720P

EDIT ASPECT RATIO : NORMAL

Fig. 81

ENGLISH

29