SVD 800 HD
3 USER REMOTE CONTROL RC 3100
RC 3100 is the User Remote Control for normal programme selection and analogue adjustments (once the projector is installed). The projector is controlled by the infrared ray remote control (I.R.) whose
maximum range is approximately 10 metres with new batteries.
The following figure describes the functions of the buttons on the User Remote Control.
Displays the selection menu of the available video inputs
Right arrow
Up arrow
Down arrow
Left arrow
Confirms choice
To return to the previous menu
To store image adjustments
To select the type of sync filter between FAST or SLOW.
Will give you a still frame when the UPC converter is ON.
To switch the UPC ON or
OFF
To switch the projector ON or OFF
1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 |
9 | AV/0 |
| ESC... |
- |
| + | ∙∙∙ |
EXIT |
| ENTER |
|
VCR | MEMO |
|
|
| UPC | MUTE | INFO |
|
| 8 |
|
To select the signal input directly.
Also used to turn the projector ON.
To exit any menu
To change the contrast, brightness, peaking, hue and colour saturation values
To access the aux. menu
Not active
To recall NORMALISED values of brightness, contrast, peaking, hue and saturation
To select screen format (Small, Normal, Wide 16/9, Cinema, Letter Box).
To display status and displayed signal information
To switch the picture on/off keeping the projector on
Fig. 4
