![](/images/new-backgrounds/1191566/19156663x1.webp)
|
|
| SVD 800 HD |
|
|
| |
|
| ||
5.8.7 Copy (COPY) |
| 5.8.8 MOVE (MOVE) | |
This function allows you to copy a memory location | This function allows you to move a memory bank to | ||
containing settings in another location. | another position on the list. | ||
Press or . Select COPY, ENTER. | Press or . Select MOVE. |
ENGLISH
- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL
LOAD |
| N | HOR VER | F | LABEL | |||
| 00 | 33.7 | 60 | N | ATSC1080 | |||
|
| 01 | 15.6 | 50 | N | PAL |
| |
COPY | ||||||||
| 02 | 15.7 | 60 | N | NTSC358 | |||
| 03 | 31.5 | 70 | N | ||||
| 04 | 31.5 | 60 | N | ||||
MOVE | 05 | 31.2 | 60 | N | 31K 10HZ | |||
| 06 | 48.4 | 00 | N | VESA 1024 | |||
| 07 | 64.3 | 60 | N | 64K 60HZ | |||
DEL | 08 | 71.7 | 76 | N | UN 76HZ | |||
09 | 44.9 | 60 | N | ATSC720P | ||||
|
COPY A BANK TO ANOTHER ONE
Fig. 88
Press or
. Select a memory bank (from 00 to 29) to be copied.
Press ENTER. The following message will appear:
COPY A BANK FROM 01 TO
Fig. 89
- MEMORY MANAGER - BANK 01 SIGNAL NAME PAL
LOAD |
| N | HOR VER | F | LABEL | |||
| 00 | 33.7 | 60 | N | ATSC1080 | |||
COPY |
| 01 | 15.6 | 50 | N | PAL |
| |
| 02 | 15.7 | 60 | N | NTSC358 | |||
| 03 | 31.5 | 70 | N | ||||
| 04 | 31.5 | 60 | N | ||||
MOVE | 05 | 31.2 | 60 | N | 31K 10HZ | |||
| 06 | 48.4 | 00 | N | VESA 1024 | |||
| 07 | 64.3 | 60 | N | 64K 60HZ | |||
DEL | 08 | 71.7 | 76 | N | UN 76HZ | |||
09 | 44.9 | 60 | N | ATSC720P | ||||
|
MOVE A BANK TO ANOTHER ONE
Fig. 93
Press ENTER. The following message will appear:
MOVE A BANK FROM
Fig. 94
Press or . Select the memory bank (from 00 to 29) |
|
where to copy the information. | Press or . Select the memory bank (from 00 to 29). |
Press ENTER to confirm. The following message will | Press ENTER. The following message will appear: |
appear: |
|
COPY A BANK FROM TO XX ?
Fig. 90
Press ENTER to confirm. If the destination memory bank is free you will be asked to enter a name for the bank and the following message will appear:
ENTER NEW BANK NAME - - - - - - - -
Fig. 91
Press or
. Select the characters of the name (label).
Press or
. Change the cursor position.
Repeat until the name is complete and then press ENTER. The following message will appear:
- MEMORY MANAGER -
BANK | 01 SIGNAL NAME | PAL | ||||
LOAD | N | HOR VER | F | LABEL | ||
| 00 | 33.7 | 60 | N | ATSC1080 | |
COPY | 01 | 15.6 | 50 | N | PAL | |
02 | 15.7 | 60 | N | NTSC358 | ||
CONFIRM03 NEW31.5 NAME70 | N: | |||||
| 04 | 31.5 | 60 | N | ||
MOVE | 05 | 31.2 | 60 | N | 31K 10HZ | |
| 06 | 48.4 | 00 | N | VESA 1024 | |
| 07 | 64.3 | 60 | N | 64K 60HZ | |
DEL | 08 | 71.7 | 76 | N | UN 76HZ | |
09 | 44.9 | 60 | N | ATSC720P | ||
|
ENTER NEW BANK NAME XXX - - - - -
Fig. 92
Press ENTER to confirm.
Note: The copy will be made even if the horizontal and vertical frequencies do not match those of the video input signal.
MOVE A BANK FROM 01 TO
Fig. 95
Press or
. Select a free destination memory bank (from 00 to 29).
Press ENTER. The following message will appear:
MOVE A BANK FROM 01 TO 13 ?
Fig. 96
Press ENTER to confirm. The following message will appear:
MOVE BANK TO ANOTHER ONE
Fig. 97
Press EXIT to return to the previous menu.
Note: If the destination bank is not free the following message will appear:
DESTINATION MUST BE EMPTY
Fig. 98
31