Sim2 Multimedia SVD 800 HD Screen format selection, Information Info, Muting video button

SVD 800 HD

3.6 Screen format selection

To select the correct screen format:

(NORMAL, SMALL, LETTER BOX, CINEMA, WIDE).

Press the button. One of the previous screen formats will appear (for instance 16/9).

16/9

Fig. 9

Each time you press a button relative to the AV inputs, you are choosing one of the aspect ratios stored in the relative memory bank. In the memory banks (see: Memory Manager) you can store several setups with the same input signal but with different aspect ratios.

Each time the button is pressed the same signal is displayed with a different aspect ratio (only if it has been stored in the relative memory bank). The possible aspect ratios are: NORMAL (NORMAL=4/3); SMALL; LETTER

BOX; CINEMA; WIDE.

The message will disappear shortly afterwards.

Note: Only by selecting the SMALL aspect ratio format will you get +12V on the rear panel connector marked by

, used to control the screen.

3.8 Information (INFO)

The INFO menu displays information on a current input signal.

- GENERAL INFORMATION 1/2 -

INPUT	VIDEO1
HORIZ. FREQ.	15.66 KHZ
VERT. FREQ.	50 HZ
VIDEO STANDARD	PAL
COMB FILTER	ON
UP CONVERTER	OFF
BANK NAME	PAL
BANK LOADED	01

Fig. 11

Press INFO again. The second part of the information will be displayed relating to the image parameters and settings.

- GENERAL INFORMATION 2/2 -

SYNC SOURCE	SEPARATE H/V
CLAMPS. POS.	AUTO
SYNC FILTER	SLOW
TLV SYNC	OFF
COLOR TEMP.	6500 °K
INSTALLATION	CEILING-FRONT
ASPECT RATIO	NORMAL
SOFTWARE REL.	6.00

Fig. 12

Press a third time or ESC to exit.

3.9 Muting video button

Press MUTE for about 2 seconds. The picture will darken while the projector stays on; the picture will reappear immediately if you press the button again.

3.7 VCR button (Sync filter)

Press VCR to change the sync time constant. Whenever you press the VCR button you toggle the sync filter type from FAST to SLOW and vice versa.

Note: FAST is recommended for the VCR. SLOW is recommended for video signal broadcasting.

FAST

Fig. 10

3.10 Normalised button

Press . The adjustments relative to contrast, brightness, colour saturation, hue and peaking, stored in the current bank, will be loaded automatically.

3.11 UPC button

Press UPC. It will turn on or off the converter that doubles the input signal lines.

Note: only on models with UPC.

3.12 Freeze button

Press . To have a still picture. When pressed again the picture will run normally.

This function is only active if the UPC converter is active.

10