Simplicity OSHK80, HMSK110, HMSK80 manual Engine & Frame Group 8HP, Manual Start, 985633

Engine & Frame Group - 8HP, Manual Start

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985633

Position idler pulley (Ref. 25) at center of slot in clutch arm (Ref. 22).

3

1Use 0-2 washers between Ref. 40

&22 to assure a centered belt and no

		interference between			5
		pulleys Ref. 19 & 25.
			25	26	6	Hook one end of spring (Ref. 27)
				39	4	over clutch rod assembly (Ref. 22)
			40
		39				between tabs and other end into
						slot in frame.
		39				7
		18
				27
		23		21
2		22
		20	24
	19

21 8

18	16	9	10
17		15
		14

8

					11
				13	12
	Long hub of idler pulley
	(Ref. 19) to be toward
	idler arm (Ref. 16).	38
Torque to	37
10-14 ft. lbs. or
14-20 N m				28	Hook one end of spring (Ref. 15)
	36
					into top hole of idler arm (Ref. 16)
				29	and other end into top hole of the idler
					arm assembly in the Traction Drive Group.
		33	32	29
	35	34		30

Position belt stop (Ref. 33)	31
	Right rear bolt.
1/16 to 1/8 inch from belt
when auger clutch is engaged.

The above parts group applies to the following Mfg. Nos.:

1693650 860M, 8HP Manual Start

1693651 860M, 8HP Manual Start (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. 14 TP 400-2307-03-LW-S