Simplicity HMSK80, OSHK80, HMSK110 manual 985634

Engine & Frame Group - 8HP, Manual Start

NOTE: Unless noted otherwise, 985634

use the standard hardware torque specification chart.

Position idler pulley (Ref. 34) at	3
center of slot in clutch arm (Ref. 31).

1	Use 0-2
	washers
	between
	Ref. 58 & 31
	to assure a
	centered
	belt and no
	interference
	between			4
	pulleys Ref.			35
	27 & 34.	34	57

	58
	57
	57
28	30
2
32	36
31	33
27	29

30
	24
28
25
23
26
21	22
	21
	20

	Hook one end of spring (Ref. 24)
	into top hole of idler arm (Ref. 25)
	and other end into top hole of the
Long hub of idler pulley	pilot arm assembly in the traction
(Ref. 27) to be toward	drive group.
idler arm (Ref. 25).

Secure engine lead
wire for headlight to		51	50
oil filler tube.
		52
	54	53
55
				56
		47	46	45
Torque to		48
		49
10 - 12 ft. lbs.

42

44	43	21
		21	42
Position belt stop (Ref. 42)
		43
1/16 to 1/8 inch from belt		44
when auger clutch is
engaged.

		Hook one end of spring
5		(Ref. 36) over clutch rod
	6	assembly (Ref. 31)
		between tabs and other
		end into slot in frame.

	8
	9
7	11

10

12

13

14

15

16

17

19

18

37

38

40

41	39
	Right rear bolt

The above parts group applies to the following Mfg. Nos.:

1693652 860DLX, 8HP Manual Start

1693653 860DLX, 8HP Manual Start (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. 16 TP 400-2307-03-LW-S