Simplicity HMSK80, OSHK80, HMSK110 manual 985643

Handles and Controls Group

NOTE: Unless noted otherwise, 985643

use the standard hardware torque specification chart.

1

5

					Apply adheasive to
					secure grips.
	71		4	6	8	11	15					3
		70			9		2
	49
		72					16 17	18		20
													34
73		6	10
									19	21
			59	7	6					22		23	35
						13
			60	38								25
													36
												75
				6
												24	9
69			56									26
		57											27
		58					12
				62
		54		59							6
	29			76							8	6
			58					51
30
											14
	31			61
						74					28	37
68	63	55
		56					52				29
64		57	Shift rod assembly									39
	65		(Ref. 54) must pivot							30		36
			freely on pivot blocks										Mount bushings
						53
			(Ref. 59).							31		38
													(Ref. 36) with flanges
67													on inside of brackets
				Mount clutch cable to cable			Torque to			32	39		(Ref. 41 & 48).
		65		support, see	specific								40
							19 - 29 ft-lbs.			38
				Engine & Frame Grroup.
56		66							33				41
							45
	57												42
										36
							46
													43
						36
											44
		63
							47		48
	Linkage adjustment for traction and auger drive									20
	with power boost: with drive levers engaged, the								49
	bottom end of lower rods (Ref. 33 & 67) should be
	flush with bottom of springs (Ref. 32 & 68).

50

The above parts group applies to the following Mfg. Nos.:

1693652	860DLX, 8HP Manual Start	1694243	970E, 9HP Electrical Start
1693653	860DLX, 8HP Manual Start (Export)	1693656	1180M, 11HP Manual Start
1694241	860DLXE, 8HP Electric Start	1693657	1180M, 11HP Manual Start (Export)
1693654	970M, 9HP Manual Start	1694244	1180E, 11HP Electrical Start
1693655	970M, 9HP Manual Start (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. 10 TP 400-2307-03-LW-S