Simplicity OSHK80, HMSK110, HMSK80 manual 985773, Slot in frame

Engine & Frame Group - 8HP, Manual Start

NOTE: Unless noted otherwise, 985773

use the standard hardware torque specification chart.

Position idler pulley (Ref. 25) at center of slot in clutch arm (Ref. 22).

3

1Use 0-2 washers between Ref. 40

&22 to assure a centered belt and no

interference between		5
pulleys Ref. 19 & 25.
25	26	6	Hook one end of spring (Ref. 27)
	39	4	over clutch rod assembly (Ref. 22)
40
			between tabs and other end into
39			slot in frame.
39			7
18

		27
23		21
2	22
	20	24
19

21 8

18	16	9	10
17		15
		14

8

		11
	13	12
	Long hub of idler pulley
	(Ref. 19) to be toward
	idler arm (Ref. 16).
	38
Torque to	37
10-14 ft. lbs. or		Hook one end of spring (Ref. 15)
14-20 N m
	28	into top hole of roller arm (Ref. 16)
	36	and other end into top hole of the idler
	29	arm assembly in the Traction Drive Group.

	32	29
	33
35	34
		31
	Position belt stop (Ref. 33)
	1/16 to 1/8 inch from belt
	when auger clutch is engaged.

30

Right rear bolt.

Export Only

41

42

43

42	44
	43

The above parts group applies to the following Mfg. Nos.:

1693763 860M, 8HP Manual Start

1693775 860M, 8HP Manual Start (Export)

1693984 860M, 8HP Manual Start

1693985 860M, 8HP Manual Start (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. 20 TP 400-2307-03-LW-S