10.Fold the fabric and stitch along the seams on each side, just a needle width from the original stitching line. Remove the basting.
c. Wrong side of fabric
11.Fold the fabric along the buttonhole end and stitch triangular ends on the original stitching line.
12.Press and trim the patch to within 5 mm of the stitching.
a. Right side of fabric c. Wrong side of fabric
NOTE:
When sewing weaker fabric, reinforce buttonhole area. Cut a patch of fusible interfacing 3 cm wider and 2 cm longer than the buttonhole. Fuse to wrong side over each buttonhole marking.
EYELET
This stitch pattern is used for making belt holes and other similar applications.
101Eyelet Satin Foot (B)
You can choose 3 sizes of eyelets by changing the stitch length.
1.Place the fabric under the presser foot and lower the presser foot. Start the machine. Machine will sew the eyelet and stop automatically.
2.Press the thread cutter button and raise the presser foot.
3. Make a hole in the center of the eyelet.
Note:
Eyelet punch is not provided with this machine.
37 |
