OVERCASTING-

OVERLOCKING

A.USING THE OVERCASTING FOOT

No. 9 (Stitch Width 5.0)

No. 15, 16, 30 (Stitch Width 5.0-7.0)

Overcasting Foot (C)

Press fabric against the guide plate of the overcasting foot so that needle falls near the edge of seam.

a.No. 9 (Width=5.0) is used for preventing raveling of fabrics.

b-d. No. 15, 16, 30 can sew overcasting and regular stitches at the same time. Therefore it is convenient for sewing easy to ravel and stretch fabrics.

CAUTION: To prevent accidents. Overcasting foot should be used for sewing patterns 9, 15, 16, 30 only. Do not change the stitch mode or elongation. It is possible that the needle could hit the presser foot and break when sewing other patterns and widths.

B.USING THE GENERAL PURPOSE FOOT

No. 9, 12

General Purpose Foot (A)

Place fabric so that needle will fall nearest to edge of fabric when using the General Purpose Foot.

e.For narrower zigzag width (Width=2.0-4.5).

f.Use No. 12 when sewing easy to ravel or stretch fabrics.

C. NOTE:

You can also cut off the excess material after sewing the inside of fabric.

Be careful not to cut thread when cutting excess fabric.

29

Page 29
Image 29
Singer 9960 instruction manual Overcasting Overlocking, Using the Overcasting Foot, Using the General Purpose Foot