Device Quickstart Guide
This device is a FXS and FXO telephone adapter, enabling low cost Internet calls from standard telephone apparatus.
1.Before you begin
Verify that you have the following:
SPA3000 (software version 2.0.9(GWi)) and Power Supply
SPA3000 Cabling
PC (Initially for configuration of the SPA3000 A PC is used for monitoring and reporting of the Gateway status, but this does not have to be local to the SPA3000)
A network connection to the Internet
An analogue phone with an RJ11 connector
Phoneserve literature including:
-Phoneserve Omni Quick Install Guide (this document)
-Phoneserve Omni Account Details (available from your account manager)
-Phoneserve Omni user instructions (available from your account manager)
2.Cabling the SPA3000
Connect a standard telephone to
Connect the standard RJ45 Ethernet cable (supplied) to the LAN port. The other end of this cable should be connected to your Network feed (Router, Hub, Switch or similar).
Finally, Insert the power adapter cable into the 5V power socket of the SPA and power up the device by plugging the power adapter into a live power outlet.
© Phoneserve. All Rights Reserved Worldwide. | info@phoneserve.com | 2 |
|
|
