16 SIR-ALP10T Installation Guide
4. When the Nav Menu screen is
displayed, touch the

Setup

button, or
select it by tilting the joystick to highlight
it and press the

ENTER

button.
5. When the Setup screen is displayed,
touch the

Traffic Information

selection,
or select it by tilting the joystick to
highlight it and press the
ENTER
button. Note: If the Traffic Information
selection is grayed out and cannot be
selected, this indicates that the SIR-
ALP10T is not connected, or connected
incorrectly. Check to be sure you have
correctly installed the SIR-ALP10T
according to the instructions in this
manual.
6. The next Setup screen will display the
Data SID near the bottom of the screen
where it says

Sirius ID

. Copy the Data
SID to the space provided on page 22
of this manual.
Activating the SIRIUS Audio and/orData Services
1. Be sure that your Alpine headunit and
Navigation systems are turned on and
that you have the SID information
available.
2. Call SIRIUS toll-free at 1-888-539-
SIRIUS (1-888-539-7474) to activate
your subscriptions.
3. During the activation process, be sure
to tell the operator that have a receiver
on which you want to activate both a
SIRIUS Radio service subscription and
a SIRIUS Traffic service subscription.
Provide the operator with both the Audio
SID and the Data SID.
Once the subscription process is
completed, your audio and/or navigation
system is ready to use. Refer to the Alpine
headunit and/or navigation system owners
manuals for operation instructions.
If you have subscribed to the SIRIUS Traffic
service, proceed to the next section to
continue with the traffic information setup.