Right-angle | Antenna (21’ cable) |
SMB Connector | Mount on Roof of Vehicle |
Note: Connect the RED (ACC/IGN) wire ONLY when using the SIR-ALP10T without an Alpine headunit.
DATA
Red (Pin 1) – ACC, Connect to
Switch
Ignition Switched Circuit
Yellow (Pin 2) – Connect to
Battery Positive (+)
Black (Pin 3) – Connect to Chassis
Ground (–)
3.5-meter Data Cable (Connect to Alpine NVE-N872A)
2.5-meter Ai-NET Cable (Connect to Alpine SAT Ready Headunit or Signal Processor)
Note: It is important to follow the Input/Output configuration of the Ai-NET system. The directionality is in reference to the Audio Path.
Gray Ai-NET connectors are Audio Input
Dark Blue Ai-NET Connectors are Audio Output. (Exception is the connector on an Alpine Headunit – it can be either Input or Output depending on the position of the Ai-NET switch on the bottom of the unit.
SIR-ALP10T Installation Guide | 9 |
