Skil 3335-01 manual Unpacking and Checking Contents

SM 2610957121 05-08 6/5/08 7:35 AM Page 8

Unpacking and Checking Contents

!To avoid injury from unexpected start- WARNING ing or electrical shock, always remove

plug from power source when tool is not in use.

Model 3335-01 Motorized Scroll Saw is shipped com- plete in one carton.

1.Unpacking and Checking Contents. Separate all “loose parts” from packing materials and check each item with the “Table of Loose Parts” to make sure all items are accounted for before discarding any packing material.

!WARNING If any parts are missing, do not attempt to operate Scroll Saw, plug in

the power cord or turn the switch on until the miss- ing parts are obtained and are installed correctly.

	Table of Loose Parts
Item Description		Qty.
A Scroll saw with light attached		1
B	Extra pin blade	1
C Allen Wrench (4 mm)		1
D	Operating Guide	1

NOTE: Hardware to mount this Scroll Saw to a bench or leg set is NOT supplied.

2.If you wish, you may apply a coat of paste wax to the table to allow the workpiece to slide easily across the table surface. Wipe the table thorough- ly with a clean dry cloth.

FIG. 1

A

B

C

D

FIG. 2

Tools Needed

	COMBINATION SQUARE MUST BE TRUE
	Check its accuracy as illustrated below.
		STRAIGHT EDGE OF
		BOARD 3/4"(19mm) THICK-
	DRAW LIGHT LINE	THIS EDGE MUST BE
PHILLIPS SCREWDRIVER	ON BOARD ALONG	PERFECTLY STRAIGHT

THIS EDGE

	SHOULD BE NO GAP OR OVERLAP WHEN
COMBINATION SQUARE	SQUARE IS FLIPPED OVER IN DOTTED POSITION

8.