Table of Contents

PACKAGE CONTENTS		.	4
.			.
OVERVIEW			5
INSTALLATION			6
LIGHTS AND SOUNDS			9
STANDARD PROGRAMMING			10-14
	-Program the Time Clock		10
	-Recording a Message		10
	-Playback Pre-recorded Message		11
	-Storing Telephone Numbers		11
	- A. Storing telephone numbers in memory
	(Sends the emergency voice message only)		11-12
	- B. Storing telephone numbers in memory
	(Sends both emergency voice message and numeric information)		12
	- C. Storing telephone numbers in memory
	(Sends the numeric information to pager only)		13
	-Delete A Telephone Number From Memory		13
	-To Review or Modify the Pre-programmed Phone Numbers, The
	Redial Count and/or The Repeat Times of a Phone Number		14
	-Activate the Dial-Alert with The Panic Button on the Keypad		14
ADVANCED PROGRAMMING			15-20
	-Program the calling time		15
	-Programming a Pause Period		15
	-Set the type of Phone System		16
	-Program the ID Code of a Transmitter		17
	-Delete Programmed Transmitters/Sensors/Security Systems		17
	-To Arm/Disarm the Dialer		18
	-Delay Dialing (Entry/Exit Mode)		18
	-Universal Dial Tone		19
	-Dial Sequence Setting		20
CONNECT THE DIAL-ALERT WITH YOUR EXISTING ALARM SYSTEM			21
QUICK GUIDE			22
BATTERY MAINTENANCE			23
	-Dial-Alert		23
ADDITIONALACCESSORIES			24-26

PACKAGE CONTENTS

All materials required for installation are included with this package

1Dial-Alert (AD-433S)

1Telephone Line

1antenna (installed)

1AC adapter

19 volt alkaline battery

1 Packofscrewsandanchors(forDial-Alert)

One template

Double sided tape

User's instructions

Warranty Card

Quick Guide

–3–

–4–