SkyLink SC-100 manual Package Contents, Overview, Congratulations, Lights and Sounds page

PACKAGE CONTENTS

Everything required for installation is included with this package

1Control Panel (SC-001) includes: 1 antenna (installed)

1 AC adapter

1 9 volt alkaline battery

Two sets of Door/Window Sensors (WT-433), each set includes:

1 transmitter

1magnetic switch

1magnet

2spacers

112 volt alkaline battery (installed)

1Motion Sensor (PS-434A) includes:

19 volt alkaline battery

1Keychain Transmitter (4B-434) includes: 1 12 volt alkaline battery (installed)

3 Packs of screws and anchors

(for Control Panel, Door/Window Sensors and Motion Sensor) Sheet of templates

Double Sided Tape (to aid in the installation of the Control Panel, Door/Window Sensors and Motion Sensor)

Warning Stickers 2 pcs User's instructions Warranty Card

Quick Guide

OVERVIEW

Congratulations!

You have just purchased one of the most reliable and up-to-date wireless security systems on the market today. Skylink is the first company to incorporate the rolling code technology in a home/business security system. This innovative technology provides increased security and trouble free wireless connections which greatly reduces false alarms. It guarantees that the Control Panel will only recognize radio waves from it’s remote sensors, (door/window sensor, motion sensor and the keychain transmitter), which prevents high tech thieves from duplicating signals and tampering with your system.

This user's instructions is divided into 6 categories.

1. Planning, Installation and Testing (pages 5-10)

-explains how to plan a security strategy.

-how to install the Control Panel and the remote devices, (door/window sensor and the motion sensor).

-once everything is installed, explains how to test each device.

2. Lights and Sounds (page 11)

-explains the function of all the lights on the Control Panel.

-describes all the sounds emitted from the Control Panel.

3. Standard Programming and Passwords (pages 12-15)

-how to arm and disarm the system using the Control Panel.

-how to use the 4 button keychain transmitter to arm and disarm the Control Panel.

-how to personalize your MPIN (Master Personal Identification Number).

-how to program a SPIN (Secondary Personal Identification Number).

4. Advanced Programming (pages 18-22)

-the Control Panel receives signals from the remote sensors in four different zones. Explains how to program different remote sensors to different zones.

-the Control Panel is programmed with different alarm modes for different situations. Explains how to program these alarm modes.

-explains the different alarm sequences preprogrammed at the factory for your convenience.

5. Summary Table (page 23)

- summarizes all preprogrammed alarm sequences.

6. Maintenance (page 24-26)

- explains how to change batteries in all remote sensors and the Control Panel.

–3– –4–