PC Menu Setting
The user may set up PC menu after select and enter PC signal.
1.Press Menu key to enter OSD menu and then press ＜＞ key to select Picture option.
2.Press ∧∨ key to select the Screen Setting.
3.Press ＜＞ key to adjust the function.
4.Press Menu key to return to the previous menu.
5.Refer to the manual if necessary.
Auto Adjust: press ＜ ＞ key on the remote controller to adjust the horizontal position, vertical position to make the picture get the best display.
Horizontal Position: adjust the horizontal position of the PC screen.
Vertical Position: adjust the vertical position of the PC screen.
Size: adjust the size of the screen.
Phase: adjust the phase of pixels to avoid interruption when need.
PICTURE
Auto Adjust
Horizontal Pos.
Vertical Pos.
Size
Phase
Sound Setting
Sound
The user may customize different sound modes to realize the best sound effect.
1.Press Menu key to enter OSD menu and then press ＜＞ key to select Sound option.
2.Press ∧∨ key to select the option.
3.Press ＜＞ key to adjust the function.
4.Press Menu key to return to the previous menu.
Sound Mode: press ＜ ＞ key to select, five modes are available including user, movie, music, standard and sport.
Balance: adjust the balance of sound
Auto volume: if this function is used, when the user powers on TV set, it shall adjust the volume to the level of last watch automatically. This function may be set as ON or OFF.
Surround Sound: press this option to enter to set ON/OFF.
SPDIF Output: press ＜ ＞ key to select, three modes area available including PCM, AC3 and OFF. (only for digital television in HDMI state)
SOUND
Sound Mode | Standard |
EQ |
|
Balance |
|
Auto Volume | Off |
Surround Sound | Off |
SPDIF Output | PCM |
